Jon Marshall Wed, 05/09/2007 - 00:04
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi Melvyn


Yes you can do this. Follow these steps


1) from enable mode do a "dir" on the pix. This should show you the image and it's location eg


Directory of disk0:/


5 -rw- 5437440 00:04:20 Jan 01 2003 asa704-k8.bin

1334 -rw- 5958324 10:20:06 Mar 03 2006 asdm-504.bin


62947328 bytes total (51515392 bytes free)


2) from enable mode

copy disk0:/asa704-k8.bin tftp://"tftp server address"


Attached is a lin with full details:


http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080450b92.html


HTH


Jon

Actions

This Discussion