cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1003
Views
10
Helpful
9
Replies

Cor List with nip autentifications

robert.bernal
Level 1
Level 1

Hello Guys, Im setting up CCME but i want to use a dial-peer with:

destination-pattern 9T

I need to block Cell calls, with an Nip

How can i do this with out Cor List.

Regards.

9 Replies 9

paolo bevilacqua
Hall of Fame
Hall of Fame

You mean a PIN ?

This is after-hours / login configuration.

See:

http://cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a008080d9ad.html#wp1011535

Hope this helps, please rate post if it does!

thanks for your reply

I was looking the way to authentificate users

before the may the col and i found in this forum a Cor list integration with AAA autentification, and its done.

Regards

May be you saw tcl ivr aaa authentication ?

What are you referring to ?

The script acctfixedpin.tcl is an unsupported script (originally written by John Rosinski) which provided

authentication of users via accounts on a Radius server. I modified this a little using COR on CCME to

provide local authentication without a RADIUS server. See configurations below which I am using in a

production environment in Mexico.

!

! Put acctfixedpin.tcl file on router flash

! Put enter_account.au on flash

!

!

! These are some sample 5-digit PIN codes entered on the router for local authentication

!

security passwords min-length 6

!

username 12345 password 0 123456

username 54321 password 0 123456

!

aaa authentication login h323 local

aaa authorization exec h323 local

aaa authorization network h323 local

Very good, may I ask you to post the script ?

I did the same for modifications to AA-BACD and a recorder script.

Here is the Script, i make few changes, i attach my confs too.

Its working good.

Regards.

Great, thanks!

hy,

i have the same thing, but it doesn't work for me, i have CCME.

i have applied the script and when i dial the number, the message "connected" is displayed in the screen and the call is terminated after few seconds.

Please help me to solve this problem.

thanks.

I got lucky, working fine with CME 8.5. Great share, thanks a lot

Rgds,

Tonka