05-09-2007 03:38 AM
Hi,
I would like to know the procedure for degrading the PIX 7.0 to 6.3. Earlier Client was using 6.3 and we upgraded to 7.0. Due to some reasons they want to go backk to 6.3. Any procedue need to follow?
Please help.
Thanks in Advance.
karuna
05-09-2007 04:37 AM
Hi Karunanithi,
use the downgrade command as follows.
pix#downgrade tftp:
hope ur clear with this.
rate this post if ur satisfied.
05-09-2007 08:26 AM
Hi Karuna,
To degrade you may need the activation key( I used the free 56-bit VPN-DES activation key). Link http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml
If you are using pix 515e here are the commands:
diagram: PC-(with tftpserver running)---e0-PIX-e1
Commands:
1. int e0 //pc connects to e0 int
2. address 10.0.0.1 //pix int ip add
3. server 10.0.0.2 // tftp server ip add
4. file pix63.bin //image filename
5. tftp
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: