05-09-2007 05:48 AM - edited 03-05-2019 03:57 PM
Dear Support,
I'm a router QoS person, and am completely lost with Catalyst QoS. Seems to be more wrr/srr rather than class-map and policy-map
Am I missing the point or looking in the wrong place?
Can anyone point me to a guide that shows me the syntax and some examples.
Thanks in advance
I always rate helpful posts.
Regards, Adrian.
05-09-2007 06:01 AM
Hi Adrian
I don't believe the 3750 runs CatOS, only IOS although i could be mistaken.
Attached is a link to QOS configuration for 3750 - IOS based.
HTH
Jon
05-09-2007 06:11 AM
Jon,
I don't think Adrian means CatOS. I believe he meant QOS on Catalyst switches and that of course would be IOS on a 3750.
However, the QOS configuration guide link that your provided is correct.
Adrian,
I agree the QOS format isn't universal across every platform and it does vary with the architecture. As you stated SRR or shaped round robin is the queueing method supported on 3750 switches. There should be plenty of documentation and examples available on CCO for you to configure this feature.
HTH
Sundar
05-09-2007 06:14 AM
Many thanks for your responses, so its of to learn another cisco language :-)
thanks adrian.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide