low memory

Unanswered Question
May 9th, 2007

good day, I have a problem catalyst 3560 since he himself after several days, it sends a message to me of which it has low memory, does not allow me to access VTY way and no Console way, after some hour does not respond echo to me ICMP and by ultimi it lets comutar and the communication is affected,

this problem is due to I deal corupt in my network? or it is a problem of makes of these equipment?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Amit Singh Wed, 05/09/2007 - 09:46

What is the IOS version you are running on the switch. Please paste " show version" and " show run" from the switch.

-amit singh

angelalvarez Wed, 05/09/2007 - 12:00

Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(25)SEB4, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Tue 30-Aug-05 14:19 by yenanh

ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SE1, RELEASE SOFTWARE (fc)

Core_PatioI uptime is 7 hours, 53 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipservices-mz.122-25.SEB4/c3560-ipservices-mz.122-25.SEB4.bin"

cisco WS-C3560G-48PS (PowerPC405) processor (revision D0) with 118784K/12280K bytes of memory.

Processor board ID FOC1024Y205

Last reset from power-on

1 Virtual Ethernet interface

52 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:18:73:5E:90:80

Motherboard assembly number : 73-9705-04

Power supply part number : 341-0108-03

Motherboard serial number : FOC102255HX

Power supply serial number : DCA10221EWK

Model revision number : D0

Motherboard revision number : A0

Model number : WS-C3560G-48PS-E

System serial number : FOC1024Y205

SFP Module assembly part number : 73-7757-03

SFP Module revision Number : A0

SFP Module serial number : CAT10180MUU

Top Assembly Part Number : 800-26346-03

Top Assembly Revision Number : A0

Version ID : V03

CLEI Code Number : COM5D00ARA

Hardware Board Revision Number : 0x05

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 52 WS-C3560G-48PS 12.2(25)SEB4 C3560-IPSERVICES-M

Configuration register is 0xF

_____________________________________________

angelalvarez Wed, 05/09/2007 - 12:03

Current configuration : 2666 bytes

!

version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname Core_PatioI

!

enable secret

enable password

!

no aaa new-model

vtp domain metro

vtp mode transparent

ip subnet-zero

!

!

!

!

no file verify auto

!

spanning-tree mode pvst

spanning-tree extend system-id

no spanning-tree vlan 1

!

vlan internal allocation policy ascending

!

!

interface GigabitEthernet0/1

!

interface GigabitEthernet0/2

!

interface GigabitEthernet0/3

!

interface GigabitEthernet0/4

!

interface GigabitEthernet0/5

!

interface GigabitEthernet0/6

!

interface GigabitEthernet0/7

!

interface GigabitEthernet0/8

!

interface GigabitEthernet0/9

!

interface GigabitEthernet0/10

!

interface GigabitEthernet0/11

!

interface GigabitEthernet0/12

!

interface GigabitEthernet0/13

!

interface GigabitEthernet0/14

!

interface GigabitEthernet0/15

!

interface GigabitEthernet0/16

!

interface GigabitEthernet0/17

!

interface GigabitEthernet0/18

!

interface GigabitEthernet0/19

!

interface GigabitEthernet0/20

!

interface GigabitEthernet0/21

description Carolina

!

interface GigabitEthernet0/22

description Vias_Ferreas

!

interface GigabitEthernet0/23

description Edif_Logistica

duplex full

speed 100

!

interface GigabitEthernet0/24

!

interface GigabitEthernet0/25

!

interface GigabitEthernet0/26

!

interface GigabitEthernet0/27

!

interface GigabitEthernet0/28

!

interface GigabitEthernet0/29

!

interface GigabitEthernet0/30

!

interface GigabitEthernet0/31

!

interface GigabitEthernet0/32

!

interface GigabitEthernet0/33

!

interface GigabitEthernet0/34

!

interface GigabitEthernet0/35

!

interface GigabitEthernet0/36

!

interface GigabitEthernet0/37

!

interface GigabitEthernet0/38

!

interface GigabitEthernet0/39

!

interface GigabitEthernet0/40

interface GigabitEthernet0/41

!

interface GigabitEthernet0/42

!

interface GigabitEthernet0/43

!

interface GigabitEthernet0/44

!

interface GigabitEthernet0/45

shutdown

!

interface GigabitEthernet0/46

description Conexion_Lamplex

duplex half

speed 10

!

interface GigabitEthernet0/47

description SDH_MARCONI_AMARILLO

duplex full

speed 100

!

interface GigabitEthernet0/48

description Cascada 2950

duplex full

speed 100

!

interface GigabitEthernet0/49

!

interface GigabitEthernet0/50

!

interface GigabitEthernet0/51

!

interface GigabitEthernet0/52

!

interface Vlan1

ip address ####.####.####.####

!

ip default-gateway ####.####.####.####

ip classless

ip http server

!

!

!

control-plane

!

!

line con 0

line vty 0 4

password

login

line vty 5 15

password

login

!

!

end

jahilnt10 Wed, 05/09/2007 - 12:43

If a switch is running CMS for 2 to 3 days, and the switch is low on memory, the switch fails with an out of memory error.

The workaround is to close the browser and relaunch CMS.

Cheers,

Masood Ahmad Shah

BLOG: http://www.weblogs.com.pk/jahil/

angelalvarez Thu, 05/10/2007 - 04:24

Thanks, by your aid, According to I understand the official notice you recommend that it updates the IOS of the interrumptor?

That it is the CMS?

It can that is problem of the circuitry of the Switch?

Actions

This Discussion