RSPAN

Answered Question
May 9th, 2007

Hi,

I'm sitting at Level 1 and i want to monitor the port at Level 2. Can anyone tell me how to configure RSPAN?

Thanks,

SAM

I have this problem too.
0 votes
Correct Answer by ankbhasi about 9 years 6 months ago

Hey Sam,

I will say just have a look at this link. This will guide you with sample config on 2950 and will also explain you about RSPAN.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12120ea2/2950scg/swspan.htm#wp1336427

Incase you have any doubt please feel free to come back on the same.

HTH

Ankur

*Pls rate all helpfull post

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
ankbhasi Wed, 05/09/2007 - 19:56

Hi Sam,

May be we need bit more information. What is level 1 and level 2, is it the floor levels in your organisation?

Also which switches you have in your network on which you want to configure RSPAN.

You can read this link which will guide you to configure RSPAN on 3750 switch.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swspan.htm#wp1081130

Please come back with your doubts if you have any.

HTH

Ankur

*Pls rate all helpfull post

sam-lee Wed, 05/09/2007 - 20:27

Hi Ankur,

Thanks for reply. Yes, Level 1 and Level 2 are referring to the floor levels in my organization. Both levels are using 2950. Can give an example configuration in this situation?

Regards,

SAM

Actions

This Discussion