Dial-peer for multiple voice ports

Unanswered Question
May 9th, 2007

Hello guy,

I want to kwon if there is a way to configure, one dial-peer for multiple FXO voice port to make call to PSTN.

I have a VIC-4FXO and i need to create for Dial.peers for my dial plan

Is there a way to include all FXO port in one Dial-peer to make PSTN Call.

I have a huge list of Dial-peer, i dont want use 9T becase im using Cor List.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.7 (3 ratings)
gogasca Wed, 05/09/2007 - 21:36

Use trunk-group feature.

Not sure if they work for FXO...

If not use preference option for each dial-peer

Paolo Bevilacqua Thu, 05/10/2007 - 04:20

Sure, trunk-group will work with FXO.

It will give you:

* simplified configuration

* multiple trunk targets under the same DP

* many options to hunt scheme the lines

* nice statistics.

Better than that, there is only cold beer :)

robert.bernal Thu, 05/17/2007 - 07:03

thanks, i was trying but not working, do you have some example for do it with FXO

Paolo Bevilacqua Thu, 05/17/2007 - 07:12

voice-port 0/0/0

trunk-group fxo

voice-port 0/0/1

trunk-group fxo

dial-peer voice 100 pots

trunkgroup fxo

This is the minimum. You can also configure "trunk group fxo" in global mode if you want a non-default hunt scheme.

Hope this helps, please rate post if it does!

Paolo Bevilacqua Thu, 05/17/2007 - 08:00

Glad to know that worked, good luck!

As a courtesy to those providing answers, please rate all useful posts using the scrollbox below!


This Discussion