05-09-2007 08:57 PM - edited 03-14-2019 09:24 PM
Hello guy,
I want to kwon if there is a way to configure, one dial-peer for multiple FXO voice port to make call to PSTN.
I have a VIC-4FXO and i need to create for Dial.peers for my dial plan
Is there a way to include all FXO port in one Dial-peer to make PSTN Call.
I have a huge list of Dial-peer, i dont want use 9T becase im using Cor List.
Thanks.
05-09-2007 09:36 PM
Use trunk-group feature.
Not sure if they work for FXO...
If not use preference option for each dial-peer
05-10-2007 04:20 AM
Sure, trunk-group will work with FXO.
It will give you:
* simplified configuration
* multiple trunk targets under the same DP
* many options to hunt scheme the lines
* nice statistics.
Better than that, there is only cold beer :)
05-17-2007 07:03 AM
thanks, i was trying but not working, do you have some example for do it with FXO
05-17-2007 07:12 AM
voice-port 0/0/0
trunk-group fxo
voice-port 0/0/1
trunk-group fxo
dial-peer voice 100 pots
trunkgroup fxo
This is the minimum. You can also configure "trunk group fxo" in global mode if you want a non-default hunt scheme.
Hope this helps, please rate post if it does!
05-17-2007 07:42 AM
its done, i have now working my peers with trunks, thanks a lot guys.
05-17-2007 08:00 AM
Glad to know that worked, good luck!
As a courtesy to those providing answers, please rate all useful posts using the scrollbox below!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: