05-09-2007 08:57 PM - edited 03-14-2019 09:24 PM
Hello guy,
I want to kwon if there is a way to configure, one dial-peer for multiple FXO voice port to make call to PSTN.
I have a VIC-4FXO and i need to create for Dial.peers for my dial plan
Is there a way to include all FXO port in one Dial-peer to make PSTN Call.
I have a huge list of Dial-peer, i dont want use 9T becase im using Cor List.
Thanks.
05-09-2007 09:36 PM
Use trunk-group feature.
Not sure if they work for FXO...
If not use preference option for each dial-peer
05-10-2007 04:20 AM
Sure, trunk-group will work with FXO.
It will give you:
* simplified configuration
* multiple trunk targets under the same DP
* many options to hunt scheme the lines
* nice statistics.
Better than that, there is only cold beer :)
05-17-2007 07:03 AM
thanks, i was trying but not working, do you have some example for do it with FXO
05-17-2007 07:12 AM
voice-port 0/0/0
trunk-group fxo
voice-port 0/0/1
trunk-group fxo
dial-peer voice 100 pots
trunkgroup fxo
This is the minimum. You can also configure "trunk group fxo" in global mode if you want a non-default hunt scheme.
Hope this helps, please rate post if it does!
05-17-2007 07:42 AM
its done, i have now working my peers with trunks, thanks a lot guys.
05-17-2007 08:00 AM
Glad to know that worked, good luck!
As a courtesy to those providing answers, please rate all useful posts using the scrollbox below!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide