05-10-2007 02:13 AM - edited 03-03-2019 04:55 PM
I'm trying to enable CEF on 802 ISDN router but cannot find the command?
Solved! Go to Solution.
05-10-2007 02:37 AM
hi,
Unfortunately, it seems that the 802 doesn't support CEF.
Always use "Cisco Feature Navigator":
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-10-2007 02:16 AM
Hi,
use "ip cef" in the global configuration.
What is your IOS, please do "show ver" ?
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-10-2007 02:19 AM
ip cef does not work
I'm running 12.1(3)XG5 and 12.2(37) on the routers.
I'm trying to add the command, "ip verify unicast reverse-path" and it tells me to enable CEF first, so it this IOS must support it
router(config-if)#ip veri u r
% CEF not enabled. Enable first
router(config)#ip cef
^
% Invalid input detected at '^' marker.
05-10-2007 02:37 AM
hi,
Unfortunately, it seems that the 802 doesn't support CEF.
Always use "Cisco Feature Navigator":
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: