05-10-2007 06:07 AM - edited 03-05-2019 03:59 PM
I have one OS2 server and 3 OS2 w/s directly connected to a single switch. The devices can communicate via layer 2 on a 1900 switch as well as a 5500 switch. However I am trying to connect them to a 3560 or a 3745. On the IOS based switches they do not communicate locally. There is no IP whatsoever, and they are all on the same VLAN. Any idea on what causes this?
05-10-2007 06:23 AM
Hi,
Please make sure that the switch ports are configured as switch ports "switchport" not layer 3 ports.
HTH, please do rate all helpful posts,
Mohamemd Mahmoud.
05-10-2007 06:26 AM
Ports are configured as switch ports.
05-10-2007 06:37 AM
Hi,
What is the ports status, make sure that they are configured in the same VLAN and that the VLAN is configured on the switch, and review the speed/duplex config.
HTH,
Mohammed Mahmoud.
05-10-2007 06:41 AM
Already done. Same vlan, same port/duplex. Ports how as connected, however the devices cannot communicate via layer 2. thanks for the responses.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: