SRST question

Answered Question
May 10th, 2007
User Badges:

Hi


When in SRST mode, is it possible to define witch phones do register with the SRST gateway? For example I have 60 phones in the same region, as define in the CallManager (4.2), but the license for the SRST is only to 48 phones, and I would like to be able to define witch phones continue to work until the WAN link is re-establish. Is this possible and how?


Thanks


Correct Answer by thisisshanky about 10 years 2 months ago

Yes, Simply create two device pools and one SRST reference for this remote site. Assign DP1 to SRSTREF1 and DP2 - set the SRST reference to disable.


Assign the phones that require SRST to DP1 and Assign the phones that do not require SRST to DP2.



HTH


Sankar


PS: please remember to rate posts!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
thisisshanky Thu, 05/10/2007 - 08:27
User Badges:
  • Purple, 4500 points or more

Yes, Simply create two device pools and one SRST reference for this remote site. Assign DP1 to SRSTREF1 and DP2 - set the SRST reference to disable.


Assign the phones that require SRST to DP1 and Assign the phones that do not require SRST to DP2.



HTH


Sankar


PS: please remember to rate posts!

Actions

This Discussion