Power-inline issue between v4.1.171.0 and IOS 12.1

Unanswered Question
May 10th, 2007


I just upgrade WiSMs & LAP 1131s to v4.1.171.0 from

LAPs in Head Office are ok but some Branch Office LAPs are enabled, pingable, configurable but not operational.

Show power inline for the non-operational LAPs shows only 6.2W being consumed instead of the normal 12.2W by HO LAPs.

HO 3750s are running 12.2(35)SE1 along with BO 3750s with operational LAPs but non-operational LAPs are connected to 3750s running v12.1(19)EA1d.

Anyone know of known bugs, etc.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dlongworth Thu, 05/10/2007 - 18:02


Select 'Pre-Standard State' for LAP on Controller. Also requires interface shut/no shut.

Why isn't this 'Power over Ethernet' options available in WCS?

b.julin Fri, 05/11/2007 - 06:53

There's more on this in the 4.1.171 release notes along with some stuff about CDP and other things that are worth paging through.

I assume the WCS has been upgraded to the latest version as well? We're still working on ours.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode