2800 config with 4FXO VIC, voice-ports?

Unanswered Question
May 11th, 2007

I'm trying to configure the voice-ports on a 2800 router with a 4 port FXO VIC and when I issue the voice-port command it only shows ports 50-50 so I use

voice-port 50/0/1 and it comes back with invalid input at marker and it points to the 50.


boot system flash flash:c2800nm-ipvoice-mz.124-4.T.bin

boot system flash flash:c2800nm-spservicesk9-mz.123-8.T8.bin


Lights on the FXO card are lit up but I do not have any cables plugged into them, am I missing something?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion