6513 FWSM Active / Active setup

jim · ‎05-11-2007

Im about to upgrade my firewall to 3.X from 2.x and in addition add a new 6513 core switch which also has a FWSM.

I want to set the 2nd 6513 FWSM in active active mode with the orginal switch.... Does anyone have a sample configuration for this? I have about 10 context firewalls configured on the original 6513 FWSM.

Ive done this on a pair of ASA's but never on FWSM running 3.x

Any help is appreciated.

jim · ‎05-11-2007

I have about 10 days till this network change. Feel free to email me sample configs to jim@razors-edge.org

joshua.walton · ‎05-12-2007

Configuring Active/Active Failover

http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080602f98.html#wp1046889

Please rate if you are satisfied.

Cheers!

jim · ‎05-14-2007

Though I gave you five stars for a very helpful document. I was hoping for some example real world configurations I could reverse engineer for our enviornment. If anyone could lend some snippit configs I would appreciate it.

joshua.walton · ‎05-14-2007

Sorry, Ive never done this before either.

Sounds like fun! :o)