Limiting number of calls on SIP Trunk

Unanswered Question
May 12th, 2007
User Badges:

I set up a SIP trunk between CCME 3.2 (on 1841) and CCME 3.3 (on 2611XM). We've only 128 kbps of bandwidth. Use G729r8 with RTP header compression.

Does someone knows how to configure a limitation of simultaneous calls that could be handles on the trunk ?

Thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
paolo bevilacqua Sat, 05/12/2007 - 01:35
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, this is how you do that:


dial-peer voice 100 voip

session protocol sipv2

max-conns 4

...


Seem strange that you have CCME on the 1841 that does not supports CCME ?


Hope this helps, please rate post if it does!

connect101 Sat, 05/12/2007 - 04:46
User Badges:

Hi,

Thank you.


It was very helpfull.


I have rated your post.


Yes, 1841 does CCME Version 3.2 in c1841-spservicesk9-mz.123-8.YG4.bin IOS.


paolo bevilacqua Sat, 05/12/2007 - 07:32
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Good to know.

Thanks for the nice rating and good luck!

Actions

This Discussion