2007 May 12 08:06:37 IST +05:30 %SYS-5-MOD_NOSCPPINGRESPONSE:Module 6 not respon
ding... resetting module
2007 May 12 08:06:37 IST +05:30 %SYS-5-MOD_RESET:Module 6 reset from Software
The above are the messages i have recieved. I did the error decoder from Cisco. Nothing much, has anyone faced this before? Do let me know?
Attaching other outputs:
Just curious is it a problem if i have this 6248 module when all my other modules are 6348. Any other suggestions are welcome
Yes if the counter does not increment it means it could me one time issue. Also if incase you are planning to upgrade then you will reload the switch once and before doing the same I will recommend you to set the diag level to complete with a command "set test diaglevel complete" and then only reload the switch.
Also incase in future let us cross our finger is should not happen again but incase if it happens then it really need further troubleshooting and replacing the card to other slot and observing that if it is a problem with the card or slot.
But as of now I believe it is working smooth.
*Pls rate all helpfull post