View real user IP (nat)

Unanswered Question
May 12th, 2007
User Badges:

service C1

ip address XXX.XXX.29.130

active


content Test2

vip address XXX.XXX.29.143

protocol tcp

add service C1

active


group clients-group

vip address XXX.XXX.29.143

add destination service C1

active


In XXX.XXX.29.130 not view user IP (only XXX.XXX.29.143)


How to transfer IP address user to a server XXX.XXX.29.130. For example through in header http or in url.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
joquesada Mon, 05/14/2007 - 16:45
User Badges:
  • Bronze, 100 points or more


Hi,


The CSS is not able to do add such header to the packet. While using 'add destination service' under the group configuration, you would need another device to add the required information to the packet, or fix the routing on your network to avoid the need to such command under the group configuration. Without the group, you would be able to see the client's IP on the server. Thanks!


Regards,


Jose.


gnatvladimir Tue, 05/15/2007 - 02:14
User Badges:

Thanks


1) What is another device for add required information to the packet?


2) if to update soft on CSS?

Gilles Dufour Tue, 05/15/2007 - 05:09
User Badges:
  • Cisco Employee,

the CSM and the ACE module are both Cisco loadbalancers that can insert info in the http header.

This feature does not exist in the CSS and there is currently no plan to add it.


Gilles.

Actions

This Discussion