05-13-2007 09:08 PM - edited 03-03-2019 04:57 PM
hi all,
After I added below command in ASA, the telnet session seeems success but there is just a cursor prompt without other configure i can see. any command i missed ?
interface Management 0/0
nameif management
telnet 192.168.1.0 255.255.255.0 telnet
05-13-2007 09:42 PM
Hi there,
The syntax for the command you are trying to use is as follows;
telnet
So for example, you have named your Management0/0 interface 'management' so the correct syntax you should use is
telnet 192.168.1.0 255.255.255.0 management
You currently have it assigned to an interface named 'telnet'.
Nik
05-13-2007 10:31 PM
Sorry, a typing mistake.
Currently, I have set "telnet 192.168.1.0 255.255.255.0 management".
When I telnet the ASA, a black prompt open but no words appear
05-13-2007 10:42 PM
Have you configured an IP address for the management interface? This needs to be part of a subnet and cannot be a /32.
05-13-2007 10:55 PM
Yes, already configured
int management 0/0
ip address 192.168.1.1 255.255.255.0
05-14-2007 08:51 AM
Dear Acbenny,
I met this problemed before, pleaes try to change other computer and one more your connection is slow.
Best Regards,
Join
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: