I am struck up with NAT while configuring the router.
The issue is, there are 3 different subnet in my LAN. I wanna NAT all these IP like this.
ip nat inside source static 10.10.10.1 172.16.131.1
ip nat inside source static 10.10.10.2 172.16.131.2
ip nat inside source static 10.10.10.3 172.16.131.3
ip nat inside source NATME interface serial 0 overload
access-list permit ip 10.10.10.0 0.0.0.255 host 126.96.36.199
ip nat outside
ip nat inside
From the above config, I wanna do Static NAT for 10.10.10.1, 2 & 3 and dynamic NAT for rest of the IPs in the same subnet.
Please clarify me that if the above NAT is correct? as I am implementing in live n/w I wanna clear myself on this.
Thanks in Adv