maximum IOS in Cat 6500 w/ Sup 32

Unanswered Question
May 14th, 2007
User Badges:

Hi Guys,


Any one who knows where I can find a documentation where it says the maximum images of IOS in flash of the Cat 6500 Series with Supervisor 32.


Thanks,


Marcos

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Loading.
Danilo Dy Tue, 05/08/2007 - 14:57
User Badges:
  • Blue, 1500 points or more

Hi,


Sup32 info

1. DRAM

- 512 MB DRAM comes by default on the Sup32 for both the base board and MSFC2A, and both are field upgradeable to 1 GB

2. FLASH

- 256 MB is default size of the internal compact flash and is not field upgradeable.

- External compact flash is optional on Sup32. The compact flash supported at FCS are: MEM-C6K-CPTFL64M, MEM-C6K-CPTFL128M, and MEM-C6K-CPTFL256M


Well, with the maximum DRAM and FLASH that the Sup32 Supported, there is no current IOS that will exceed that requirement - even half of it.


http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item0900aecd801ff38a.shtml


Dandy

e-dennington Mon, 05/14/2007 - 06:23
User Badges:

You can have as many as you want, but flash memory is limited to 256MB for on-board flash. I'm not sure if there is a size limit for the size of flash cards that the Sup32 supports.

marcos.marques Mon, 05/14/2007 - 06:32
User Badges:

Have a document it says that? I need a document shows this information but not find.

Actions

This Discussion