05-14-2007 07:43 AM - edited 03-11-2019 03:13 AM
Ok, newbish to cisco stuff, just put in a new 506e. Everything is working so far, except now my high speed debit/credit terminals will not communicate through the router. Moneris says port 443 has to be "open". Well, it is, isn't it? I can check my account balance online, which is a secure https connection, with no problems. Do i need to create 2 specific rules to allow traffic on that port to those terminals?
Thank you for your time.
Maury
05-14-2007 07:49 AM
What's the direction of the TCP/443 traffic? From the outside to the inside or from the inside to the outside?
05-14-2007 08:00 AM
Well, thats a good question. I'm assuming its outside to inside, which should have no issues. We swipe the debit card, and it contacts a server somewhere, then sends back a reply. But, its not communicating properly, so it reverts to the dial backup. I can ping from the terminal, but its communication to its server is not functioning.
05-14-2007 08:14 AM
What does your NAT setup look like?
sh nat
sh global
Feel free to sanitize the output if you need to.
05-14-2007 08:52 AM
Not much to sanitize really :)
sh nat
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
sh global
global (outside) 1 interface
05-14-2007 09:26 AM
"Well, thats a good question. I'm assuming its outside to inside, which should have no issues."
I beleive i meant "inside to outside", sorry if that caused any confusion.
05-14-2007 10:27 AM
So it's...
Terminals -> Inside PIX -> Outside PIX -> Internet -> Server
Is this traffic from the terminal to server go over vpn or is that nat exemption for something else?
05-14-2007 10:45 AM
I have a VPN setup using the Pix and the cisco VPN client. This will be for my remote users to use for remote access so i can lock down the rdp ports currently used.
05-17-2007 01:30 PM
Looks like it was an issue with one of my wireless bridges not getting rebooted after the new router install.
Thanks for the effort though!
Maury
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide