I am at a Customer Site. We need to have our PIX 515 ship some traffic that will originate from connected VPN clients to some inside networks.

The networks that we need to reach are:

10.224.164.0.24

10.224.165.0/24.

This is the configured routes on the PIX (i cut and pasted this in)

s1fwbri01# sho route

outside 0.0.0.0 0.0.0.0 216.30.179.129 1 OTHER static

Servers_Private 10.9.1.0 255.255.255.0 10.9.1.1 1 CONNECT static

Servers_Private 10.10.0.0 255.255.128.0 Tunnel1-Internal 1 OTHER static

inside 10.224.0.0 255.255.0.0 10.224.204.6 1 OTHER static

inside 10.224.164.0 255.255.255.0 10.224.204.2 1 OTHER static

inside 10.224.165.0 255.255.255.0 10.224.204.2 1 OTHER static

inside 10.224.202.0 255.255.254.0 10.224.204.6 2 OTHER static

inside 10.224.204.0 255.255.255.248 10.224.204.1 1 CONNECT static

outside 216.30.179.128 255.255.255.128 216.30.179.132 1 CONNECT static

I am not sure if the "route 10.224.0.0 statement may be overidinig the subnetted routes to 10.224.202, 165, etc.

What do I need to do to ship traffic to networks 10.224.164.0 and 10.224.165.0??

thx