Hello,
I've configured my 878 router as a PPTP VPN server. It works very fine and very quickly. Using the XP VPN client from a remote site, I can "see" all servers in my network.
2 questions
1) When doing telnet on the 878 through the VPN, it is very slow.
2) I would have to get access to the internet through the VPN. But this does not work.
What should I change in this config :
Thanks in advance,
Guy
version 12.3
no service pad
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
service password-encryption
service linenumber
service sequence-numbers
!
hostname ineo-21029
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 .....
!
username ...
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
ip subnet-zero
no ip cef
no ip dhcp use class
!
!
ip name-server 212.100.160.51
ip name-server 212.100.160.52
ip port-map ms-sql port 1433
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
no ftp-server write-enable
isdn switch-type basic-net3
!
controller DSL 0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex B
line-rate auto
!
interface BRI0
no ip address
shutdown
isdn switch-type basic-net3
!
interface ATM0
description === to PE/Router ====
no ip address
ip accounting output-packets
load-interval 30
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 8/35
oam-pvc manage 5
oam-pvc manage cc end direction both
oam retry 3 3 1
oam retry cc end 3 3 30
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Virtual-Template1
ip unnumbered Vlan1
peer default ip address pool test
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap ms-chap-v2
!
interface Vlan1
description $FW_INSIDE$
ip address 192.168.2.2 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp chap hostname ....
ppp chap password ....
ppp pap sent-username ....
!
ip local pool test 192.168.2.240 192.168.2.250
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
ip http server
no ip http secure-server
ip nat inside source list 101 interface Dialer1 overload
!
access-list 101 permit ip 192.168.2.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
control-plane
!
line con 0
exec-timeout 120 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
access-class 113 in
exec-timeout 0 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
