WLSE - Limit of Infrastructure/Ad-hoc rogues tracking

Unanswered Question
May 14th, 2007

I am getting this message, and I can't find anything to help resolve it. Any suggestions? Thanks,

The limit of Infrastructure/Ad-Hoc Rogues the system can track has been exceeded, new rogues may not be tracked

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jreekers Mon, 05/14/2007 - 14:44

Hi Chris.

The maximum number of rogues that can be shown in WLSE is 5000.

Since WLSE has reached this limit, you are seeing the message.

To delete the rogues , please navigate to IDS>Manage Rogues and select the "Select *ALL" *& 'Delete' option to delete the rogues.

Please Note:

If the unknown (rogue) radio count is over 5000 in your environment, you will again hit

this number and the same warning message will be popped up. The only way around this is to either manage those radios or mark those radios as friendly.

HTH,

-Joe

chris.houston Wed, 05/16/2007 - 05:03

Thanks for the information. I tried that, but it did not resolve my issue. I finally found some information that fixed it. The problem was that the number of ad-hoc?s exceeded the 5000 limit of rogues. By using the following link, I was able to clear it.

http://:1741/debug/rogue_delete.jsp

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode