cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
490
Views
0
Helpful
2
Replies

WLSE - Limit of Infrastructure/Ad-hoc rogues tracking

chris.houston
Level 1
Level 1

I am getting this message, and I can't find anything to help resolve it. Any suggestions? Thanks,

The limit of Infrastructure/Ad-Hoc Rogues the system can track has been exceeded, new rogues may not be tracked

2 Replies 2

jreekers
Level 4
Level 4

Hi Chris.

The maximum number of rogues that can be shown in WLSE is 5000.

Since WLSE has reached this limit, you are seeing the message.

To delete the rogues , please navigate to IDS>Manage Rogues and select the "Select *ALL" *& 'Delete' option to delete the rogues.

Please Note:

If the unknown (rogue) radio count is over 5000 in your environment, you will again hit

this number and the same warning message will be popped up. The only way around this is to either manage those radios or mark those radios as friendly.

HTH,

-Joe

Thanks for the information. I tried that, but it did not resolve my issue. I finally found some information that fixed it. The problem was that the number of ad-hoc?s exceeded the 5000 limit of rogues. By using the following link, I was able to clear it.

http://:1741/debug/rogue_delete.jsp

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card