New SUP720 boot string issue

Unanswered Question

Why do I get the folowing response when I run command "show diagnostic sanity" on a new 720 out of the box from Cisco Systems?

Invalid boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string.

Please check your boot string.

None of the images specified in the boot string are valid.

Please specify at least one valid image in the boot string to ensure the

switch is in a bootable state.

Could not verify boot image "bootdisk:s72033-ipservices_wan-vz.122-18.SXF8.bin" specified in the boot string on the slave.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ankbhasi Tue, 05/15/2007 - 07:37

Hi Chris,

Can you confirm me few things here:-

1) Output of "sh boot"

2) Output of "sh mod"

3) Output of "sh run | in boot"

4) dir sup-bootflash: & dir disk0:

5) Output of "sh version"




This Discussion