Using 1310 Outdoor AP for a MESH Ip surveillance Network

hugoquinones · ‎05-15-2007

Hi there Iam actually in a proyect that consist on the installation of 230 Ip wireless cameras, and using about 50 AP, in a Full mesh or partial mesh using Vlans to separate in five parts, so I need to be sutre if those part numbres are the correct ones in order to perform this task:

AIR-LAP1310G-A-K9R

Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point

AIR-ACCRMK1300=

Cisco - Network device outdoor mounting kit

AIR-ANT24120

Cisco Aironet Antenna Kit Omni - Antenna - 12 dBi

AIR-LOC2710-L-K9

CISCO WLAN LOCATION APPLIANCE

WCS-APBASE-100

Cisco WCS Base License for 100 access points

AIR-WLC4404-100-K9

4400 Series WLAN Controller for up to 100 Cisco lightweight access points

thanks in advance.

Hugo Quinones.

aghaznavi · ‎05-21-2007

The 1500 Mesh AP ordering Guide will have the information on the part numbers for ordering 1500 Mesh APs:

AIR-LAP1510AG-A-K9 - Cisco Aironet 1510AG Lightweight Outdoor Mesh Access Point, FCC configuration

AIR-ACCPMK1500 - Cisco Aironet 1500 Series Pole-Mount Kit

These are the Antenna Options for the 1500 Mesh APs:

AIR-ANT2455V-N - 2.4-GHz, 5.5-dBi Omnidirectional Antenna with N Connector

AIR-ANT5175V-N - 4.9 to 5.8-GHz, 7.5-dBi Omnidirectional Antenna with N Connector

AIR-ANT58G10SSA-N - 5.8-GHz, 9.5-dBi Sector Antenna with N Connector

The ordering guide for the 1500 mesh APs is available at :

http://www.cisco.com/en/US/products/ps6548/products_data_sheet0900aecd80364a54.html

Similarly for information on ordering WCS read the information available at

http://www.cisco.com/en/US/products/ps6305/products_data_sheet0900aecd804b4646.html

For information on ordering Location Appliance read

http://www.cisco.com/en/US/products/ps6386/products_data_sheet0900aecd80293728.html