Need help with installation new 1MFT Wic controller

Unanswered Question
Erik Peterson Tue, 05/15/2007 - 17:55
User Badges:

If it is a T1/E1 card, you need to first configure "card type t1 0 0", depending on what slot you have the card in.

WIC Slot 0:

T1E1 (1 port) WAN daughter card

Hardware Revision : 0.0

Top Assy. Part Number : 800-22628-05

Board Revision : A0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC10520QNU

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VWIC2-1MFT-T1/E1

Version Identifier : V01

EEPROM format version 4


Erik Peterson Tue, 05/15/2007 - 18:16
User Badges:

So that card will do either T1 or E1, in global config, you should be able to use the card type command.

Erik Peterson Tue, 05/15/2007 - 18:25
User Badges:

Well, I can't vouch for your mind ;), but it sure seems like it should be working. Maybe try a different slot, or a reload?

Actions

This Discussion