05-16-2007 07:44 AM - edited 03-05-2019 04:06 PM
Hi all, I need to configure SSH on a 6509 running 8.1(3). I just wanted to know if SSH is supported?
Any help would be greatly appreciated.
Brian B.
Solved! Go to Solution.
05-16-2007 08:19 AM
Hi Brian,
I am attaching the same doc as .pdf file and you can download from this post.
HTH
Ankur
*Pls rate all helpfull post
05-16-2007 07:51 AM
Hi Brian,
See if this link helps you
http://www.cisco.com/en/US/partner/tech/tk583/tk617/technologies_tech_note09186a0080094314.shtml#Req
HTH
Ankur
*Pls rate all helpfull post
05-16-2007 08:10 AM
I wasnt able to login to the website, it asked for cisco user name and password, i have CCO account but it didnt let me in :(
05-16-2007 08:19 AM
05-16-2007 03:23 PM
You have to have the K9 image of catos software to run ssh . If it is a K8 image it is not supported . Also catos does not have a built in ssh client which means you cannot ssh from a catos box to another ssh device . Any catos image that has K9 as part of its name should support ssh.
05-16-2007 05:26 PM
Glen thank you, that was exactly what i wanted to know.
Thanks,
Brian Buryak
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: