Translation Rule - #01 to 18005551212

Unanswered Question
May 16th, 2007

I am having an issue with trying to get the following translation rule to work. Can anyone help? In the debugs it apears that it will only collect the #0 and then do a fast busy.


Here is my config:


translation-rule 10

Rule 1 #01 18005551212


dial-peer voice 20 pots

translate-outgoing called 10

port 0/0/0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
thisisshanky Wed, 05/16/2007 - 10:31

Your destination pattern on the pots dial-peer needs to match 18005551212 or similar (using wild cards).

mlitka Wed, 05/16/2007 - 10:51

OK. I see what your saying. The issue is now that I used '9' as a PSTN breakout. Is there anyway to match on the '#' and the translate afterwards?

Chris Deren Wed, 05/16/2007 - 10:34

Try the following instead:


voice translation-rule 1

rule 1 /#01/ /18005551212/


voice translation-profile 1

translate called 1


dial-peer voice 20 pots

translation-profile outgoing 1



Router#test voice translation-rule 1 #01

Matched with rule 1

Original number: #01 Translated number: 18005551212

Original number type: none Translated number type: none

Original number plan: none Translated number plan: none



HTH,


Chris

mlitka Wed, 05/16/2007 - 10:58

Tried that. Doesn't work. It doesn't match on any dial-peers. Thanks though.

LeeSnyder_2 Mon, 05/21/2007 - 04:11

You should upload your config.


You were trying to use translation rules where as you need to be using voice translation-rules and voice translation-profiles as per the previous reply.

Actions

This Discussion