Translation Rule - #01 to 18005551212

mlitka · ‎05-16-2007

I am having an issue with trying to get the following translation rule to work. Can anyone help? In the debugs it apears that it will only collect the #0 and then do a fast busy.

Here is my config:

translation-rule 10

Rule 1 #01 18005551212

dial-peer voice 20 pots

translate-outgoing called 10

port 0/0/0

thisisshanky · ‎05-16-2007

Your destination pattern on the pots dial-peer needs to match 18005551212 or similar (using wild cards).

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

mlitka · ‎05-16-2007

OK. I see what your saying. The issue is now that I used '9' as a PSTN breakout. Is there anyway to match on the '#' and the translate afterwards?

Chris Deren · ‎05-16-2007

Try the following instead:

voice translation-rule 1

rule 1 /#01/ /18005551212/

voice translation-profile 1

translate called 1

dial-peer voice 20 pots

translation-profile outgoing 1

Router#test voice translation-rule 1 #01

Matched with rule 1

Original number: #01 Translated number: 18005551212

Original number type: none Translated number type: none

Original number plan: none Translated number plan: none

HTH,

Chris

mlitka · ‎05-16-2007

Tried that. Doesn't work. It doesn't match on any dial-peers. Thanks though.

LeeSnyder_2 · ‎05-21-2007

You should upload your config.

You were trying to use translation rules where as you need to be using voice translation-rules and voice translation-profiles as per the previous reply.