Port forwarding Command????

Unanswered Question
May 16th, 2007
User Badges:

Does anyone know the command to forward requests on port 3389 to a specific internal host? I need to access a server via remote desktop over the Internet. I want to enter the public IP (outside interface) and have my Cisco ASA 5505 forward that port request to a server on my LAN.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Wed, 05/16/2007 - 13:33
User Badges:
  • Green, 3000 points or more

you would require a static NAT for the host u wish to access from the internet and a corresponding access-list on the outside interface.


eg.. your server has a private ip of 172.16.100.100 and the natted public IP is 203.200.22.2


static (inside,outside) 203.200.22.2 172.16.100.100 netmask 255.255.255.255 0 0


access-list acl_in permit tcp any host 203.200.22.2 eq 3389


access-group acl_in in interface outside


HTH, rate if it does

Narayan

kltconsulting Wed, 05/16/2007 - 17:10
User Badges:

I entered these commands you recommended into the CLI, but I am still unable to connect to the internal server with Remote Desktop (from an external address). I have posted my ASA's running config here. Let me know what you think.



Attachment: 

Actions

This Discussion