guruprasadr Wed, 05/16/2007 - 23:19
User Badges:
  • Gold, 750 points or more

HI Srinvas, [Pls Rate if Helps]

Telnet access steps:

step1:Identify single host/subnet that can have telnet access.

#telnet local-ip [mask] [if-name]

cmd: telnet inside

step2: configure telnet password

cmd: #password telnetpassword

step3:set duration how long telnet session can be idle

cmd: #telnet timeout 15

SSH Access Steps:

step1: configure firewall hostname

cmd #hostname pixfw

step2: configure the domain for security

cmd #domain-name

step3:generate firewall RSA key pair

cmd #ca generate rsa key 1024

step4:save the key pari

cmd #ca save all

step5:identify the host/network access the security device


#ssh ip_address [net-mask] [interface_name]

#ssh inside

step6:user to perform local authentication

cmd #password example-password

step7:ssh timeout number

cmd #ssh timeout number

Hope above steps will sure help you in configuring the PIX for Telnet & SSH secure access.

PLS Rate / Vote if Helps! !

Best Regards,

Guru Prasad R


This Discussion