05-17-2007 09:19 AM - edited 03-05-2019 04:08 PM
...and what does it mean if it is set or not set?
Is there a document that describes all the flags in the 'sh ip mroute' output?
Solved! Go to Solution.
05-17-2007 09:24 AM
Hi Friend,
SPT-bit set indicates that packets have been received on the shortest path source tree.
You can look at this link which explain nearly all the flags
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/timc_r/mlt_s1ht.htm#wp1073705
HTH
Ankur
*Pls rate all helpfull post
05-17-2007 09:24 AM
Hi Friend,
SPT-bit set indicates that packets have been received on the shortest path source tree.
You can look at this link which explain nearly all the flags
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/timc_r/mlt_s1ht.htm#wp1073705
HTH
Ankur
*Pls rate all helpfull post
01-06-2015 09:07 AM
The Link provided here is not working. Please post the currently working link here.
01-06-2015 09:22 AM
Mohammad,
I am not sure if Ankur is still reachable after 8 years (though I hope he is!). Nonetheless, I believe this is the current document:
Scroll down to Table 24.
Best regards,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide