05-17-2007 09:19 AM - edited 03-05-2019 04:08 PM
...and what does it mean if it is set or not set?
Is there a document that describes all the flags in the 'sh ip mroute' output?
Solved! Go to Solution.
05-17-2007 09:24 AM
Hi Friend,
SPT-bit set indicates that packets have been received on the shortest path source tree.
You can look at this link which explain nearly all the flags
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/timc_r/mlt_s1ht.htm#wp1073705
HTH
Ankur
*Pls rate all helpfull post
05-17-2007 09:24 AM
Hi Friend,
SPT-bit set indicates that packets have been received on the shortest path source tree.
You can look at this link which explain nearly all the flags
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/timc_r/mlt_s1ht.htm#wp1073705
HTH
Ankur
*Pls rate all helpfull post
01-06-2015 09:07 AM
The Link provided here is not working. Please post the currently working link here.
01-06-2015 09:22 AM
Mohammad,
I am not sure if Ankur is still reachable after 8 years (though I hope he is!). Nonetheless, I believe this is the current document:
Scroll down to Table 24.
Best regards,
Peter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: