Erase Nvram via Rommon in Cat6506

Unanswered Question
May 17th, 2007
User Badges:

Hi team, i need to know how erase the configuration file via rommon in catalyst 6509. I change the configuration register to 0x2142 but the router back to load a configuration file.

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mohammedmahmoud Thu, 05/17/2007 - 14:05
User Badges:
  • Green, 3000 points or more

Hi,


You should set the config-register of the MSFC not the supervisor, use one of the following links according to if you are running Native or Hybrid:


Hybrid:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080135657.shtml


Native:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080133fb1.shtml



HTH, please do rate all helpful replies,

Mohammed Mahmoud.

mohammedmahmoud Thu, 05/17/2007 - 14:17
User Badges:
  • Green, 3000 points or more

Hi,


The documents applies to the Supervisor 1, Supervisor 2, or Supervisor 720-based systems.


The difference between both, is whether you are running CatOS (Hybrid), or pure IOS (Native).



HTH, please do rate all helpful replies,

Mohammed Mahmoud.

Actions

This Discussion