cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1975
Views
0
Helpful
3
Replies

Erase Nvram via Rommon in Cat6506

joseluis.romero
Level 1
Level 1

Hi team, i need to know how erase the configuration file via rommon in catalyst 6509. I change the configuration register to 0x2142 but the router back to load a configuration file.

Thanks

3 Replies 3

mohammedmahmoud
Level 11
Level 11

Hi,

You should set the config-register of the MSFC not the supervisor, use one of the following links according to if you are running Native or Hybrid:

Hybrid:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080135657.shtml

Native:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080133fb1.shtml

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

Catalyst have a Sup720.

Hi,

The documents applies to the Supervisor 1, Supervisor 2, or Supervisor 720-based systems.

The difference between both, is whether you are running CatOS (Hybrid), or pure IOS (Native).

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: