Unity 4.0.x integration with CM4.2

Unanswered Question
May 19th, 2007

Per

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/401/integration/guide/ccm42u4x.html#wp1049135

To Enable DTMF Relay

--------------------------------------------------------------------------------

Step 1 On a VoIP dial-peer servicing Cisco Unity, use the following command:

dtmf-relay h245-alphanumeric

Step 2 Create a destination pattern that matches the Cisco Unified CallManager voice mail port numbers. For example, if the system has voice mail ports 1001 through 1016, enter the dial-peer destination pattern 10xx.

I am running mgcp and fallback to srst on my gw and not sure on the relevance of this config. Any tech note or sample configs are appreciated.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion