cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3118
Views
0
Helpful
2
Replies

wireless card in cisco 1841 router, not working

kevintang
Level 1
Level 1

Hi,

I have a HWIC-AP-AG-A card in cisco 1841 router. But the router can not recogneise the card. The show diag can see the card, but show ver can not find the card.

Any one know which IOS version and feature set support wireless card in cisco router?

===================

WIC/HWIC Slot 1:

Unknown WAN daughter card

WIC module not supported/disabled in this slot

PCB Serial Number : FOC09363ZHY

Hardware Revision : 1.0

Part Number : 73-9388-03

Board Revision : A0

Top Assy. Part Number : 800-25210-01

Deviation Number : 0

Fab Version : 03

CLEI Code : IPUIANDRAA

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : HWIC-AP-AG-A

Version Identifier : 01

Unknown Field (type 004A): 00 00

EEPROM format version 4

EEPROM contents (hex):

Cisco-1841-ADSL-Wireless#sh ver

Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Tue 24-Apr-07 13:29 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Cisco-1841-ADSL-Wireless uptime is 4 minutes

System returned to ROM by reload at 08:01:34 UTC Sun May 20 2007

System image file is "flash:c1841-adventerprisek9-mz.124-13b.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 6.0) with 116736K/14336K bytes of memory.

Processor board ID FHK1106151N

1 DSL controller

2 FastEthernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Cisco-1841-ADSL-Wireless#sh flash

-#- --length-- -----date/time------ path

1 25490280 May 20 2007 07:59:48 +00:00 c1841-adventerprisek9-mz.124-13b.bin

21291008 bytes available (42721280 bytes used)

Cisco-1841-ADSL-Wireless#

2 Replies 2

Rob Huffman
Hall of Fame
Hall of Fame

Hi Kevin,

Here is a clip from Ben's (from Cisco) excellent post (he knows more about this than I ever will :)

Yes, the HWIC-AP is supported with the 1841, but you must be running a 12.4T IOS image (in addition to the correct feature set). I'd suggest 12.4(11)T with Adv. Security or Adv. IP Services Feature Set. Make sure you meet the minimum memory requirements as well.

Your next best option would be 12.4(9)T2 with either Adv. Security or Adv. IP Services Feature Set.

Hope this helps!

Rob

Thanks, Rob

I only have 128MB memory in my router, so I can not use Adv. Security or Adv. IP Services Feature Set, they need 194 MB memory.

I used c1841-spservicesk9-mz.124-11.T2.bin file, I can see the wireless card now.

Kevin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: