05-20-2007 10:20 PM - edited 03-03-2019 05:04 PM
Hi,
I had configured 3 eigrp autonomous systems in my router, but i have so many static routes. So, how do i configure the redistribute static that should learn only specific static routes in eigrp.
05-20-2007 10:29 PM
Hi,
Try this:
router eigrp 1
redistribute static metric 10000 100 255 1 1
network 172.16.0.0
*******************************************
metric 10000 100 255 1 1500
where 10000 = Bandwidth, 100 = Delay, 255 = Reliability, 1 = Loading, and 1500 = MTU.
You could also use a route-map if you need one:
redistribute static route-map XXX
HTH
Regards,
Bjornarsb
05-20-2007 10:52 PM
HI Bjornarsb,
Can u reply the configuration for below example
I had advertised 172.25.7.0 on eigrp 110 but i have static routes for 172.25.4.0 and 172.25.3.0 and many other static routes. But i need to advertise 172.25.3.0 and 172.25.4.0 in eigrp autonomous system 110 using redistribute static route-map. So please help how do i need to configure ?
05-20-2007 10:59 PM
Hi Uday,
Give this a try
redistribute static route-map
route-map
match ip address 1
!
access-list 1 permit 172.25.4.0 0.0.0.255
access-list 1 permit 172.25.3.0 0.0.0.255
HTH
Ankur
05-20-2007 11:15 PM
thanks. But i need one more information, Please help me. If i configure 3 automonous system. Example the network 172.25.7.0 in eigrp 50 and 172.27.3.0 and 172.27.4.0 in eigrp 110 and eigrp 120. But i need to advertise 172.25.7.0 in all the 3 autonomous system , how can i do this ?
05-20-2007 11:05 PM
Here you are:
!
router eigrp 1
redistribute static route-map static-to-eigrp
network 172.25.7.0
default-metric 10000 100 255 1 1500
!
ip route 172.25.4.0 255.255.255.0 XX
ip route 172.25.3.0 255.255.255.0 XX
access-list 1 permit 172.25.4.0 0.255.255.255
access-list 1 permit 172.25.3.0 0.255.255.255
route-map static-to-eigrp permit
match ip address 1
BR,
Bjornarsb
05-20-2007 11:17 PM
thanks. But i need one more information, Please help me. If i configure 3 automonous system. Example the network 172.25.7.0 in eigrp 50 and 172.27.3.0 and 172.27.4.0 in eigrp 110 and eigrp 120. But i need to advertise 172.25.7.0 in all the 3 autonomous system , how can i do this ?
05-20-2007 11:25 PM
please reply to the above problem. How can i implement this ?
05-20-2007 11:36 PM
Hi,
You can freely redistribute from any EIGRP process (using the process IDs or ASs) to another using route-maps as illustrated above.
Or since they are on the same router, just use the same network command "network 172.25.7.0" under the 3 EIGRP routing processes.
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-20-2007 11:41 PM
Hi,
I would like to give a litlle more less lines of command that you try with out the access-list.If you have many routes then it will surely help you to reduce no. of lines command.
Here you are:
!
router eigrp 1
redistribute static route-map static-to-eigrp
network 172.25.7.0
default-metric 10000 100 255 1 1500
!
ip route 172.25.4.0 255.255.255.0 tag 30
ip route 172.25.3.0 255.255.255.0 tag 30
route-map static-to-eigrp permit
match tag 30.
regards,
05-20-2007 11:40 PM
Like this:
(config-router)#redistribute eigrp ?
<1-65535> Autonomous system number
BR,
Bjornarsb
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: