Adding HWIC 1FE to Cisco 2811

Unanswered Question
May 21st, 2007
User Badges:

I just added a new hwic to our router, to allow the addition of a DMZ, and when I booted the router back up the new interface does not show up. All of the lights are green on the back of the new ethernet port I added, but there is nothing in the config. I even tried switching the card to a different hwic slot.

Is there a command I am missing to do a hardware refresh or somtehing? I thought it would auto detect...

Thanks,

Will.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Martin Parry Mon, 05/21/2007 - 07:15
User Badges:
  • Silver, 250 points or more

Hi Will


Can you confirm what level of IOS you are running. HWIC-1FE and HWIC-2FE the minimum level is Cisco IOS 12.4(11) XJ


Regards


Martin

williamreed Mon, 05/21/2007 - 07:23
User Badges:

I found another thread which seemed to describe my exact problem, so I understand my IOS verion will need to be updated. You would think after paying $1000 for a card, you would be able to get the ios for free. My IOS Version is 12.4(3a). Any idea how I can get the new ios? I've never had to get one before.

Thanks,

Will...

Martin Parry Mon, 05/21/2007 - 07:32
User Badges:
  • Silver, 250 points or more


If you have an active service contract you are entitled to IOS updates (within your current featureset) for free.



Actions

This Discussion