No correct time on Cisco 7961G with CCM.

Answered Question
May 21st, 2007

Hello everybody

I have a problem with the telephones Cisco 7961G.

The time shows on the Cisco?s screen is 6 hours ahead from the time on the CallManager.

Version of the Cisco 7961g is SCCP41.80-4SR1S.

CallManager is 4.2(3)sr1.

Any help will be apreciated.

Regards

Walter Flores

Correct Answer by neesharm about 9 years 9 months ago

You might be running into DST related bugs

http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh12444

Also check following TCC case

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K56131451

you can try upgrading the phone load to latest 8.2 or later and see if it helps

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
wflores@its.co.cr Tue, 05/22/2007 - 08:11

HI NEESSHARM

After I upgraded the telephones Cisco 7961G y Cisco 7911G to the lastest version 8.2.

The show time on the phones are ok

THANK VERY MUCH FOR HELPING

Regards

Walter

Actions

This Discussion