We have an ASA 5510 running 7.2(1)24 and a Catalyst 3650 running c3560-ipbase-mz.122-25.SEE2.bin. I need to create trunks between the two, but so far I've had no luck.
Here are the lines of configuration that have been added, but traffic cannot be passed on any VLAN. Any guidance would be appreciated.
=== ASA ===
description Trunk to Cisco Catalyst switch
no ip address
ip address 192.168.0.5 255.255.255.0
ip address 192.168.5.1 255.255.255.0
description To ASA Port E0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,5
switchport mode trunk