2948 CatOS switch help

Unanswered Question
May 22nd, 2007
User Badges:

All, Ive never seen a 2948 CatOS switch before. Im wanting to create a trunk port to another Cisco switch. How would I go about doing that on the 2948 CatOS switch? Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
mohammedmahmoud Tue, 05/22/2007 - 14:15
User Badges:
  • Green, 3000 points or more

Hi,


It should be something like this:


set trunk 0/1 on



HTH, please do rate all helpful replies,

Mohammed Mahmoud.

mohammedmahmoud Tue, 05/22/2007 - 14:26
User Badges:
  • Green, 3000 points or more

Hi,


It should be something like this:


set trunk 0/1 on



HTH, please do rate all helpful replies,

Mohammed Mahmoud.

glen.grant Tue, 05/22/2007 - 16:04
User Badges:
  • Purple, 4500 points or more

You can use this too "set trunk desirable dot1q" . Vtp domain names must match and the switch on the far end must be set to desirable or auto for trunking . If the far end is IOS " " switchport mode dynamic desirable "

Actions

This Discussion