Meet Me issue in CCME

Unanswered Question
May 22nd, 2007
User Badges:

Hi all


Im having an issue with meet me conferencing in CCME.

i have upgraded to version 4.1 and configured meet me Scenario conferencing.

i have 4 DSP Modules .


when i dial Meet me number in first phone its getting connected.

when i dial Meet Me number in second phone directly it gives message


"" cannot complete conference""""


IM ATTACHING CCME CONFIG


plss help


Many Thanks




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
DRAGI RADOVANOVIC Wed, 05/23/2007 - 13:56
User Badges:

Is your dsp farm registered? (sho sccp)

How are you trying to connect with the second phone: by pressing MeetMe softkey and dialing or just dialing the MeetMe extension?

Try not to post your config like this, with all the numbers and stuff... Also, if this router has a public ip address configure a firewall on it as soon as possible, otherwise they will hack your phone system in no time via h323. Or, at least, on your access list 102 deny tcp port 1720.


Dragi

manojpillai Wed, 05/23/2007 - 21:16
User Badges:

sh sccp

SCCP Admin State: UP

Gateway IP Address: 192.168.0.205, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 192.168.0.205, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 100


Conferencing Oper State: ACTIVE - Cause Code: NONE

Active Call Manager: 192.168.0.205, Port Number: 2000

TCP Link Status: CONNECTED, Profile Identifier: 1

Reported Max Streams: 32, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period

: 30


Hi


this is show sccp output


first i will press the meet me softkey


then after hearing 2 beep tone


i will dial meet me number


thanks and pls help




Actions

This Discussion