Telnet to vip

Unanswered Question
May 23rd, 2007
User Badges:

Hi,

I am unable to telnet to vip address 10.19.17.2 port 80 on CSS from the box pluged into vlan 112, Am I missinfg any thig in my config below? I can telnet to the actual server 10.19.17.1

-----

service WEB

ip address 10.19.17.1

keepalive type tcp

keepalive port 80

port 80

protocol tcp

active




content WEB-VIP

add service WEB

vip address 10.19.17.2

protocol tcp

port 80

active


acl 12

clause 30 deny tcp any destination nql Interfaces range 20 23

clause 40 bypass any any destination any

apply circuit-(VLAN112)



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Gilles Dufour Wed, 05/23/2007 - 04:47
User Badges:
  • Cisco Employee,

you need a permit in your acl.

The bypass means no traffic can hit any of the content rule.

So replace the bypass with a permit.


Gilles.

mohammedrafiq Wed, 05/23/2007 - 05:13
User Badges:

Thanks,

its working now after replacing bypass with permit.


Regards,

Actions

This Discussion