05-23-2007 03:41 AM
Hi,
I am unable to telnet to vip address 10.19.17.2 port 80 on CSS from the box pluged into vlan 112, Am I missinfg any thig in my config below? I can telnet to the actual server 10.19.17.1
-----
service WEB
ip address 10.19.17.1
keepalive type tcp
keepalive port 80
port 80
protocol tcp
active
content WEB-VIP
add service WEB
vip address 10.19.17.2
protocol tcp
port 80
active
acl 12
clause 30 deny tcp any destination nql Interfaces range 20 23
clause 40 bypass any any destination any
apply circuit-(VLAN112)
05-23-2007 04:47 AM
you need a permit in your acl.
The bypass means no traffic can hit any of the content rule.
So replace the bypass with a permit.
Gilles.
05-23-2007 05:13 AM
Thanks,
its working now after replacing bypass with permit.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: