Disable Telnet on Pix 7

Unanswered Question
May 23rd, 2007
User Badges:

Hi all,


I was just wondering, is it just a case of not configuring allowed hosts that can connect ?


i.e. telnet 10.10.10.10 255.255.255.255 host


If i don't configure any of these, is that in affect disabling the use of telnet to the box or is there an actual command that i am missing that will turn off this functionality completely ?


Cheers

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 05/23/2007 - 07:58
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


No that should do it. If you don't allow any hosts with the telnet command then nothing can connect via telnet.


HTH


Jon

Actions

This Discussion