Dial-peer for Miss Call

Unanswered Question
May 23rd, 2007
User Badges:

Dear Pro:

I would like to create a dial-peer in CME to handle miss call from our IP Phone users, the miss call usually come with 8 digit local city number, currently we are using prefix 9 for outside call, the user wish to just hit the miss call number without adding the '9' prefix, can any one share your knowledge to deal with such situation.

Thanks and Best Regards


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
kelvin.blair Wed, 05/23/2007 - 11:32
User Badges:
  • Silver, 250 points or more

You need to use translation patterns on inbound calls. Here is an example of a translation pattern that prefixes the 9 on inbound calls for the calling phone.

voice translation-rule 91

rule 1 /^614\(.*\)/ /9\1/

rule 2 /^\(..........\)/ /91\1/

rule 3 /^\(.*\)/ /9\1/

voice translation-profile cid_fix

translate calling 91

voice-port 1/0:23

translation-profile incoming cid_fix

This should give you an idea on what is needed to fix the missed call problem.

yahshianhui Thu, 05/24/2007 - 17:56
User Badges:

Thanks, Kelvin

If the user wish to eliminate the prefix '9' entirely for outside line, is it possible?

Best Regards


sohaildxbfze Fri, 05/25/2007 - 02:15
User Badges:


yes u can use ignore set in translation rule to eliminate '9\'


This Discussion